Getting Started - AEG ULTRAMIX/PRO STM6 series Instruction Book

Getting started

1. Before first use, be sure to clean
GB
mixing foot and let dry. Before
inserting or removing mixing foot,
remove plug from power outlet.
4. Insert the stick mixer deep into the
beaker, begin mixing by starting at
normal speed. Make sure the beaker
is no more than 2/3 full. If you do
not use the beaker, do not immerse
the mixing foot more than 2/3 of its
length. Move stick mixer lightly up
and down to ensure best processing
of content. Release switch to stop.
* depending on model
18/24
2. Insert the handheld part into mixing
part and lock into position.
To remove, press the release button
and pull off the foot.
5. Using the mini chopper*. Place
chopper bowl on a clean, level
surface. Put stainless steel blade into
place.
3. Select the speed by moving speed
selector. Press power button to start
mixing. Press Turbo button for the
highest speed.
LED light will indicate the mixing
speed.
6. Place food into the chopper bowl*.
Amount of food to be chopped can
not exceed 250 g.
Close the lid.