1. Before using the blender for the
first time, wash all parts except for
the motor housing. The jug can also
be washed in dishwasher.
Caution! The blades are very
Note! The blade assembly is not
4. Processing hot liquids: We recom-
mend to allow hot liquids to cool
down (max 90 °C) before filling the
jug. Fill the jug only half full and
start processing on low speed.
The blender jug can become very
warm – take care to protect your
hands and to ventilate steam out
through the filler hole.
Always replace the lid before use.
2. Place the blender jug with the
handle towards the front, onto
the motor housing (The jug can
only be placed in one position).
Put the ingredients in the jug.
(Do not exceed the maximum
level as indicated on the jug.)
5. Start the blender: Plug into mains.
Press the Power button (A), the LED
light will illuminate and the display
becomes visible. Press the 1 (Low),
2 (Medium) or 3 (High) button (B),
to select your desired processing
3. Close the lid (A) and insert the
measuring cup in the filler hole and
(B) lock into position. (You can use
the measuring cup to add ingredi-
ents while the blender is running.
Close the filler hole immediately
after, to avoid splashing.)
Caution! Never run the blender
empty. When processing hot liq-
uids, see step 4.
6. It is also possible to choose one
of the ready programs for ice
crushing, drinks, soups or smoothie.
Press the button to start and the
light will indicate the program
selected. The blender will operate
max for 120 seconds, or until the
program is finished. To stop manu-
ally, press any button.