Page 1
Regenerated and reclocked outputs On board SDI to Pal converter (DOP107, optional) To be fitted in dvr-mv/rk rack SD104-M 09/06/08 ELPRO Video Labs s.r.l. Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY Tel.+39 0119348778 - FAX +39 0119348779...
Page 2
A conversion board that provides a PAL signal in output can be fitted on the plug- in. The conversion board, known as DOP107, must be ordered separately. The plug-in and the rear part must be inserted in the ELPRO 19" 3RU standard rack with code DVR-MV/RK.
Page 3
At the center of the plug-in, there is a 12-pin connector in which to insert an optional board, the DOP107. This board converts the SDI signal at 270Mbit/sec, entering the SD104, providing a Pal signal output. The Pal signal is available on the BNC connector identified as MON fitted on the DRB104 rear part.
Page 4
If one of these levels is not within tolerance, the light switches on. This function is very useful when many SD104 are fitted in an array as it permits immediate identification of the faulty unit.
SD104 plug-in. Fasten with the 3X6 screw provided. From the front panel of the rack, insert the SD104 plug-in so that the connector fitted is inserted in the edge connector present on the rear part of the DRB104.
Operating temp. range :0 ÷ 45°C Safety :according to EN 60065 :according to EN 55013 and EN 55020 CE Mark ELPRO Video Labs s.r.l. Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY Tel.+39 0119348778 - FAX +39 0119348779...
Page 7
During the warranty period, Elpro will repair the faulty units free of charge. The faulty units must be sent CARRIAGE FREE to the Elpro offices in Turin with a regular accompanying note.
Page 8
SD104 HIGH PERFORMANCE DIGITAL DISTRIBUTOR AMPLIFIER ELPRO Video Labs s.r.l. Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY Tel.+39 0119348778 - FAX +39 0119348779...
Page 9
If the input is already connected to an SDI signal either the SDI led must be switched on. SDI outputs are available on the BNC connectors OUT 1÷6...