Advertisement
Quick Links
DA 224
•
Differential input
•
Electronically balanced outputs
•
Fine adjustment of level ±6dB
•
Gain 0,+10,+24dB
•
Output impedance on 600Ω
DA224-M
ELPRO BROADCAST s.r.l.
Strada della Pronda 17 - TORINO (ITALY)
1
Tel. 0117071955 - FAX 011706210
DUAL 1x4 BAL. AUDIO DISTR. AMPLIFIER
28/05/08
Advertisement
Related Manuals for ELPRO DA 224
Summary of Contents for ELPRO DA 224
- Page 1 DA 224 DUAL 1x4 BAL. AUDIO DISTR. AMPLIFIER • Differential input • Electronically balanced outputs • Fine adjustment of level ±6dB • Gain 0,+10,+24dB • Output impedance on 600Ω DA224-M 28/05/08 ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY)
- Page 2 5.0 Accessories 6.0 Technical data 7.0 Note Please read this manual carefully before installing the DA 224. The manufacturers shall not be answerable for damage resulting from the use, proper or otherwise, of their products. Product data and specifications are subject to change without prior notice.
- Page 3 DA 224 DUAL 1x4 BAL. AUDIO DISTR. AMPLIFIER 1.0 OVERVIEW Thank you for choosing this product. Check that the following items are included in the packaging: - The DA224 unit − This handbook − The AC adapter code ADM001 The DA224 is a distributor/amplifier for stereo audio signals that is capable of distributing a signal towards 4 destinations.
-
Page 4: Power Supply
DA 224 DUAL 1x4 BAL. AUDIO DISTR. AMPLIFIER 2.0 POWER SUPPLY The DA224 unit must only be powered by means of the AC/AC adapter, code ADM001, supplied. ATTENTION The use of any other adapter may damage the equipment. There are no ratings or presettings inside the unit. - Page 5 DA 224 DUAL 1x4 BAL. AUDIO DISTR. AMPLIFIER 3.0 PRESETTINGS 6 dip-switches that can be accessed from the base of the unit enable the gain for the two channels to be selected separately. 1 R +24dB : In ON pos. channel R gain is +24dB 2 R +10dB : In ON pos.
-
Page 6: Installation
DA 224 DUAL 1x4 BAL. AUDIO DISTR. AMPLIFIER 4.0 INSTALLATION Proceed as follows for standard installation with a stereo signal to be distributed towards 4 destinations: a) Check that all the units to be installed are turned off. b) Connect the stereo source to the INL and INR terminals... - Page 7 Turin works.Repaired units shall be returned CARRIAGE FORWARD to the consignee. Faulty units that are no longer covered by guarantee shall be repaired by Elpro EX WORKS Turin and the work shall be charged to the customer. For any problems regarding installation of the DA224 call the Elpro hot line 011 705835 or send an E-mail to: elprosrl@tin.it...
- Page 8 Blank panel 2U − ADR 3U BLK Blank panel 3U − EP BOX1 Kit for wall mounting of EASYPATCH − EP RACK1 Mounting on 19" of EASYPATCH ELPRO BROADCAST s.r.l. Strada della Pronda 17 - TORINO (ITALY) Tel. 0117071955 - FAX 011706210...