Advertisement
Quick Links
SD124
•
Segnalazione presenza SDI in ingresso
Incoming SDI indicator
•
Circuito autosensing per segnalazione avaria
Autosensing circuit for fault monitoring
•
Compensazione fino a 200mt di cavo RG59B/U
Equalization up to 200 meters of RG59B/U cable
•
Uscite rigenerate e ricloccate
Regenerated and re-clocked outputs
•
Compatibile 19" con l'adattatore ADR1UM1
Compatible with 1U 19" structure using the ADR1UM1 adapter
SD124-M 08/07/2005
ELPRO Video Labs s.r.l.
1
Via della Praia, 4/A 10090 Ferriera di Buttigliera Alta (TO) ITALY
Tel.+39 0119348778 – Fax +39 0119348779
DUAL 1X4 DIGITAL DISTRIBUTION AMPLIFIER
Advertisement
Related Manuals for ELPRO sd124
Summary of Contents for ELPRO sd124
- Page 1 Regenerated and re-clocked outputs • Compatibile 19” con l’adattatore ADR1UM1 Compatible with 1U 19” structure using the ADR1UM1 adapter SD124-M 08/07/2005 ELPRO Video Labs s.r.l. Via della Praia, 4/A 10090 Ferriera di Buttigliera Alta (TO) ITALY Tel.+39 0119348778 – Fax +39 0119348779...
-
Page 2: Table Of Contents
3.0 Installation 4.0 Technical data 5.0 Notes Please read this handbook carefully before installing the SD124. The manufacturer accepts no responsibility for damage arising from the use of its products, including the correct use thereof. Product data and specifications may be subject to change without notice. - Page 3 The distributor contains all the equalizing and re-clocking circuits needed to regenerate SDI signals from coax cable sections of up to 200 meters. The SD124 comes in a 1U case that can be inserted into a 19” structure using the ADR1UM1 adapter.
-
Page 4: Indicators
SDI IN1 and SDI IN2 in one or both sections of inputs. the distributor. ELPRO Video Labs s.r.l. Via della Praia, 4/A 10090 Ferriera di Buttigliera Alta (TO) ITALY Tel.+39 0119348778 – Fax +39 0119348779... -
Page 5: Installation
(Marked with the letter E, may be green) WARNING The unit must be earthed ADM030 adapter and mains cable for use with the SD124 ELPRO Video Labs s.r.l. Via della Praia, 4/A 10090 Ferriera di Buttigliera Alta (TO) ITALY Tel.+39 0119348778 – Fax +39 0119348779... - Page 6 - If the coax cable is not an RG59B/U cable, it has the same characteristics - That the input cable is not more than 200 meters long. ELPRO Video Labs s.r.l. Via della Praia, 4/A 10090 Ferriera di Buttigliera Alta (TO) ITALY...
-
Page 7: Technical Data
:5 VDC (with AC adapter ADM030) Power consumption :max 5VA Operating temp. range :0÷45° Safety :according to EN60065 :according to EN55103-1 and 55103-2 Mark ELPRO Video Labs s.r.l. Via della Praia, 4/A 10090 Ferriera di Buttigliera Alta (TO) ITALY Tel.+39 0119348778 – Fax +39 0119348779... -
Page 8: Notes
Elpro will return the repaired units CARRIAGE FORWARD to the addressee. After the period covered by the guarantee, Elpro will repair defective units on an EX- WORKS basis at its premises in Turin, and the customer will be liable for the entire cost of repairs.