Vonets VAP11G-300 Technical Training Manual
300 mbps wifi bridge/repeater
Hide thumbs
Also See for VAP11G-300:
- Product manual (14 pages) ,
- Quick setting manual (8 pages) ,
- Quick setting manual (3 pages)
Related Manuals for Vonets VAP11G-300
Summary of Contents for Vonets VAP11G-300
- Page 1 VONETS VAP11G VONETS ADAPTER SETUP GUIDE Houston Barnett – Tech Support Specialist Joe Tram – Technical Training Manager FP Education Center 11/18/16...
- Page 2 Ethernet connection. Connect the Ethernet and USB cables to your laptop or device. (As seen below) Wait until the VONETS adapter is fully powered on. This is indicated by a fast blue and slow flashing green light as seen below.
- Page 3 Open your browser and enter IP address 192.168.254.254 and press enter. The web interface of the VONETS adapter will open in your browser.
- Page 4 Use the credentials below to log into the vonets. Username: admin Password: admin After logged in, a list of Wifi networks in your area with be populated. (As seen below) Note: If your network is not in the populated list, click the Refresh List button(As Shown Above) to search for your network.
- Page 5 Select your network and click next. In the “Source wireless hotspot password” section, enter the network key/password in the field as seen below and then click apply.
- Page 6 This is due to the wireless router issuing a new IP address for the Vonets. If the page does refresh, the password entered is not correct. Confirm that your password is correct and try again.
- Page 7 The VONETS device will now reboot. Wait for the adapter to power back on. Once both blue and green lights are flashing try to browse to a webpage. The Caution symbol ( ) should disappear if the network password entered is correct. (As...
- Page 8 To reset the device to connect to a different network, press and hold the small black button next to the cable on the device for 30 seconds. (As Seen Below) The device will reset and allow you to start the setup process again.
-
Page 9: Indicator Light Instructions
Indicator Light Instructions... - Page 11 Connectivity Settings and Downloading Postage: Connectivity Setting. 1. Power ON PostBase meter and wait until Home screen is displayed. 2. Select Menu, press scroll button twice and select Manage Connection. 3. The PostBase meter will display its current connection settings. 4.
- Page 12 9. When the connection is established, the screen will display “Connection Test Successfully Finished”. Press and you may now Download Postage. Downloading Postage. 1. Press and select 2. Enter desired amount of postage (minimum of $10), press continue. 3. Confirm the amount by pressing Postage will begin downloading immediately;...
- Page 13 Thank You!
Need help?
Do you have a question about the VAP11G-300 and is the answer not in the manual?
Questions and answers