Page 2
VONETS is the registered trademark of Shenzhen HouTian Network Communication Technology Co.Ltd. The other all trademarks or registered trademarks mentioned in this documents are belong to the individual owners. The product specifications and information technology mentioned in this manual are just for reference, if any updates, without other notice.
Page 3
II. Set Network 1. Repeater + Bridge Mode 1) Connect VRP300-PLUS: ①PC wired connect to the Ethernet port of VRP300-PLUS; ②Or connect WiFi signal of VRP300-PLUS by Smart phone and PC, its hotspot parameters as below: WiFi SSID: VONETS_****** WiFi Password: 1234578 2)Open Browser, input configured page: http://vonets.cfg...
Page 4
3)Enter User name and Password in login page (both are admin), click “Login” button to enter configured page; “Scan Hotspots”, choose the source hotspots, click “Next”; 5)Input “Source wireless hotspot password”, click “Apply”; 6)Reboot the device, VRP300-PLUS will connect to the configured WiFi hotspot...
Page 5
③VRP300-PLUS is connected failed, hotspot connection status light (Green Light) will slow flash. 2. AP Mode In AP mode, there is no need any configuration, wireless connection to the VRP300-PLUS hotspot can be networked (For connection method, please refer to “Repeater+bridge mode” setting) Remark 2: When VRP300-PLUS is connected to external network, its IP address will be changed.
Page 6
VONETS——VRP300-PLUS 300M WiFi Repeater/Bridge 3) Revise WiFi password, in “WiFi Repeater”----”WiFi Security”, enter new WiFi password in “Pass Phrase”, click “Apply”; 4) Reboot device, jump to “System Settings”----”Equipment To”, click “Restart”, when it is finished, then it will take effort;...
Page 7
Damage. 2. Does VRP300-PLUS support firmware upgrade, how to upgrade? VRP300-PLUS supports firmware upgrade, and support online upgrade, please visit website: www.vonets.com to refer to the related documents. 3. The device WiFi hot spot can be found, but the smart phone or PC can’t connect to this device hotspot? ●...
Page 8
5. The smart phone or PC has been connected the device by WiFi or Ethernet cable, but user can’t log in the device WEB page, or after log in the WEB it shows error? ● Reason 1. The users don’t use the browser recommended by VONETS(IE, Google Chrome, Safari, the mobile phone browser);...
Need help?
Do you have a question about the VRP300-PLUS and is the answer not in the manual?
Questions and answers