Changing Filters; Opening The Camera Head - Moravian Instruments G2 Series Mark II User Manual

desired temperature without risking of the temperature-induced sealing
damage.
This design also allows usage of some optional parts:

Threaded hermetic cap, which allows sealing of the dried
container when it is not immediately attached to the camera
head.

Alternate (somewhat longer) desiccant container, modified to be
able to be screw in and tightened (as well as released and
screwed out) without any tool.
The sealing cap as well as the tool-less container are not supplied with
the camera, they are supplied only as optional accessory.
Figure 25: Optional cap, standard container and the tool-less variant of the
container

Changing Filters

It is necessary to open the camera head to change filters or the whole filter
wheel. To open the head, unscrew the six bolts holding camera head
together.

Opening the camera head

The blade shutter rotates 180° between individual snapshots. Camera
cover could be opened only when the shutter is fully closed (covers the
39