TATA Motors TIAGO XZ 2019 Owner's Manual page 113

Removal of Jack
After removing spare wheel, jack can be
accessed. Unscrew the jack then slightly
tilt it to take out from the bracket. Re-
verse the procedure for restoring the
jack.
EMERGENCY AND BREAKDOWN ASSISTANCE
Wheel covers (if equipped)
Insert a piece of cloth between the
spokes of the wheel cover and pull it out-
wards. Take out detached wheel cover
from the wheel rim.
When installing the cover, make sure
that it is positioned so that it does not
cover the air filling valve. Apply equal
pressure at the circumference of the
wheel cover to fix it in the wheel rim.
NOTE
Do not use any sharp tools (such
as screw driver etc.) to remove the
wheel cover.
Changing flat tyre
Loosen the nuts of the flat tyre in diago-
nal sequence as indicated in figure. Do
not remove the nuts completely before
jacking the vehicle.
Wheel nut removal
105