Changing Your Hp Protecttools Settings - HP iPAQ hw6500 series User Manual

You must authenticate yourself and wait for the decryption
process to complete before synchronizing using Microsoft
ActiveSync. If decryption is not complete before synchronization
begins, ActiveSync may not be initiated. To correct the problem,
disconnect and reconnect the device after decryption is complete.
If you enable Server Synchronization on ActiveSync, it is
recommended that you do not select a Mobile Schedule to
automatically initiate synchronization. Since authentication and
decryption are necessary when the HP iPAQ is turned on,
automatic synchronization does not work properly when HP
ProtectTools is enabled. The same problem may also arise when
using other server-based synchronization products.

Changing Your HP ProtectTools Settings

If you want to change any of your security information, you can
do so easily. Tap the yellow lock icon in the Taskbar at the
bottom of the Today screen.
Five options are displayed:
Lock Device
Logoff
User's Guide
Using Security Features
New
screenshot
14–8