Changing The Light Bulb; Customer Service - AEG SANTO Series Operating Instructions Manual

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or pull the fuse or the
circuit breaker.
Light bulb data: 220-240 V, max. 15 W
1. To switch off the appliance, turn the temperature regulator to
position "0".
2. Unplug the mains plug.
3. To change the light bulb, undo the
cross head screw and remove the light
bulb cover.
4. Change the defective light bulb.
5. Refit the light bulb cover and the
cross head screw.
6. Put the refrigerator back into operation.

Customer Service

If you cannot find the remedy for a malfunction in these operating
instructions, please contact your dealer or our customer service
department. Addresses and telephone numbers are listed in the accom-
panying booklet "Guarantee Conditions/Customer Service Locations".
Selective ordering of replacement parts can save unnecessary travel
and costs. For this reason always provide the following appliance
information:
• Model Name
• Model Number (PNC)
• Serial Number (S-No.)
This information can be found on the serial plate in the interior at the
right of the appliance. We recommend that you enter this information
here, so that it is handy if needed.
Note: The customer bears the costs of unjustified customer service
calls even during the guarantee period.
AEG65
53