SMXir Keypad/Display
SMX II Keypad/Display
The SMXir Remote Control
The SMXir remote control keypad has the familiar layout of
the 10-button SMX keypad, and performs most of the same
functions. The remote can not be used to program settings.
Programming must be done at the keypad/display.
In addition to the standard keys, the SMXir remote also has
two quick-hit buttons that allow easy access to the humidity
control program and the automatic changeover mode.
The remote has three buttons that are not used on SMX II
systems. The Aux Heat, Aux Heat Auto Switchover, and the
Aux 1 buttons are for SMX Net systems only.
The SMXir remote control must be pointed at the SMXir
keypad/display, which has the IR remote receiver. The
remote will not work if the SMXir keypad/display has the
optional full coverage door and the door is closed.
See Figure 23 for SMXir Remote control angle and distance
range.
SMXir Remote Control
18
L-0952 Operation
English