Specifications - Sony PSONE SCPH-131 Instruction Manual

18
Troubleshooting (continued)
Sound
There is no sound.
, Headphones may be connected to the LCD screen. To
listen to sound from the stereo speakers, disconnect the
headphones from the LCD screen.
, The headphones may not be properly connected to the
LCD screen. Securely insert the headphones into the
i (headphone) jack on the LCD screen rear.
, Adjust the volume.
There is poor sound quality.
, Clean the disc.
, Make sure the disc is not damaged.
, Place the unit on a solid and stable surface.
There is no picture or sound from a connected device.
, Make sure the AV cable is connected properly at both
ends.
, Make sure you have the correct AV cable for the AV
output jacks of the connected device. For details, see
"Connecting video equipment to the LCD screen"
(page 16).

Specifications

General
Power requirements
AC adaptor: 7.5 V DC
(120 V AC, 60 Hz)
Power consumption
6.8 W (Not including power used
™
by the PS one console.)
Dimensions (approx.)
182 ✕ 186 ✕ 34 mm (w/h/d)
✕ 7 ✕ 1
1 1 1
(7 / / / in)
8 4 4
(Measurements at widest points.)
Weight (approx.)
335 g (12 oz)
Operating temperature
5˚C - 35˚C (41˚F - 95˚F)
Picture size (approx.)
4 ✕ 3 in (102 ✕ 76 mm) (w/h)
5 in (127 mm) (diagonally)
Display
Transparent TN LCD panel
Drive system
TFT active matrix system
Speakers
40 ✕ 28.5 mm (1 ✕ 1
1 1
/ / in)
2 8
1.0W type
Inputs/outputs
Inputs
AV IN jack (mini-jack)
! DC IN 7.5V connector
Outputs
AV MULTI OUT connector
i (headphone) jack (3.5 mm
stereo mini-jack)
0.1 W (EIAJ/32 ohms)
(continuous RMS power
output)
Supplied accessories
See page 11.
Optional accessories
SCPH-170
U
Car adaptor (for PS one ™ )
SCPH-180
U
AV connection cable
Design and specifications are
subject to change without notice.