Pco ultraviolet User Manual page 39

Flip/Mirror: image will be flipped or mirrored.
Rotate Left/Right: rotates the image in steps of 90°.
Set 'File Save ROI': if you want to save just a part of
the recorded image (region of interest), it is possible to
draw a rectangle with the mouse. This rectangle is valid
for all recorded images and can be dragged at its
edges.
Line Tool: point the mouse where the line
should start and left-click. Move the mouse to
the desired line end and left click again. The
line may be stretched, shrunk or moved by
grasping its end point. A Line Diagram opens.
The graph in the length of the line (units: pixel)
is displayed showing the intensity values of the
pixels along the red line.
Crosshair: activates a centered crosshair. Size
and color are selectable see chapter 6.9.2 →
Options.
To move the crosshair drag it by mouse, just
drag it by mouse. Reset it to center position by
double-click into the center of the crosshair.
Copy to Clipboard: will copy the actual image to clipboard.
Properties: shows the current settings for View Mode / Common
View Mode and Image Conversion.
39
6. CAMWARE 4 SOFTWARE