Page 2
The information is subject to change without notice and does not represent a commitment on the part of PCO in the future. PCO hereby authorizes you to copy documents for non- commercial use within your organization only.
"Camera"-Menu or by the corresponding button in the toolbar: The camera control dialog always adapts to the camera type connected. For the pco.dimax the camera control settings are spread over six property , which will be explained below.
Electronics Temperature Display of electronics and sensor temperature. Active cooling by fan is implemented in the pco.dimax. There is no need for Peltier cooling. Due to digital temperature compensation and sophisticated electronic design the pco.dimax comes with ultra stable offset, where there is no need for extra black or current session references.
Resolution The drop down list offers the existing image sensor spatial resolutions of all PCO camera systems. Please select the specific resolution and bit depth of the images to be opened! If double shutter images have been recorded and should be opened, “Double Shutter Mode” should be checked.
This command should be used to import a single image into the currently active image window. Only files with the extension and format of "*.b16" (PCO proprietary binary image format) and "*.tif" (TIFF image format) can be imported. If the recorder is enabled, each imported image will be transferred to the buffer shown in the picture number.
Page 39
PCI interfaces. Finally, the NICs vary in the used chipset. Strongly recommended are chipsets from Intel. There are different ways to connect one or several PCO GigE cameras to a computer. Only some of them are introduced here: One camera system: •...
Page 40
The checkbox next to “pco.camera with GigE” is checked for activating and unchecked for deactivating. Note: It is absolutely essential that the PCO GigE driver is only activated at the specific NIC that is physically connected to your camera! In addition, just the service “pco.camera with GigE”...
Page 41
• to check, if the network is configured correctly. How does it work? First of all the camera is set to default. After that images of the PCO camera are requested with a delay of 80µs between each UDP image packet. If the image could be transferred (no lost packets), the delay is decreased and again images are requested.
Page 42
GigE does not work with maximum performance! „Packet Delay“: The delay between two UDP packets sent from a PCO GigE device to a computer. Values from 0µs to 320µs are possible. ,Max Speed Mode“: With this mode a maximum data throughput up to 100 MB/s is possible.
Appendix Digital Camera Tools CD-ROM You find all necessary and some additional software and drivers on the accompanying CD. For the pco.dimax models please select “pco.camera”. For the latest versions please check our website: Image Converter Use the PCO file converter to •...
Kelheim site. We deliver roughly 4.000 cameras a year to customers all over the world. As in every cutting edge technology, dialogue with the user is the main focus of PCO’s approach. Worldwide representatives, in cooperation with the in-house marketing division and technical support team, ensure that PCO camera systems are developed in step with the individual requirements of our customers.