The Modem Manager Setup Wizard - Novatel V620 User Manual

3.2 THE MODEM MANAGER SETUP WIZARD

After you have successfully completed the installation process of Modem Manager, you are ready to start the Modem
Manager program and begin your initial setup. The steps in the Setup Wizard are critical to the proper operation of
Modem Manager when using your WWAN or Wi-Fi device to connect to the Internet wirelessly.
Step 1
Click the Start button, select the Programs menu and choose the Modem Manager menu item to start the Modem
Manager program.
Note: WWAN (Wireless Wide Area Network) denotes any 1xEVDO, 1xRTT such as , or .
GU-90023487
Revision 4
Step 2
On first-run of Modem Manager the Setup Wizard will
automatically run. You will be presented with a
Welcome screen.
If you have an Internet connection, it is recommend
that you check to see if you are running the lastest
version of Modem Manager. Click the Check for
Updates button to perform this check.
Click Next to continue.
Step 3
In this step of the Setup Wizard you must specify the
type of wireless device that you intend to use with
Modem Manager. Select "Detect both Wi-Fi and
WWAN", "Detect WWAN device only (1xEV-
DO/1xRTT/CDMA)". For the purposes of this guide,
"Detect both Wi-Fi and WWAN" will be used. Please
note that your experience in Step 4 may be different if
you use a different selection. After making the
appropriate selection, click Next to continue.
Step 4
In this step Modem Manager will detect the Wi-Fi
adapters on your computer. If your computer has a
built-in Wi-Fi adapter, you do not need to do anything
and can proceed to the next step. Otherwise, please
insert your Wi-Fi PC Card now. You will need the
drivers for the card if not already installed on the
computer. Once complete, click Next to continue.
Step 5
The Modem Manager will now detect and setup your
WWAN device.
Step 6
In this step you need to select the type of connectivity
you wish to use with your wireless device. For the
purposes of this guide, we will select "PC Card".
Please note that this selection may not be appropriate
for your type of wireless device. Once you have
selected your connectivity option, click Next to