Interwrite PRS User Manual page 79

Chapter 4
Running a
PowerPoint Slide
Show with PRS
Question Slides
When you run a PowerPoint Slide Show with PRS Question slides,
InterWrite PRS is launched, if it isn't already running, and the following
PRS New Session dialog displays.
re-ask the Question, leave this setting at the default Yes. On the other
hand, you may have set up your presentation in such a way that PRS
Slides further on in the Slide Show might reveal something that will hint at
the correct answer in an earlier slide. You may want to go back and re-ask
that Question to see how many students picked up on the correct
answer. In that case you would set this option to No.
As you go through the Slide
Show, when a PRS Question
Slide is encountered—identified
by the PRS logo—a Response
Grid or Attendee List, depend-
ing on the Display Mode
chosen, will display in a Re-
sponse Area across the lower
portion of the Slide. You can
size and move the Response
Area to an optimal placement
over the PRS Question Slide.
PRS remembers the size and
position of the Response Area
for each Question Slide in the
Slide Show.
Lessons – PowerPoint Lessons
Define the Session Profile here
just as you would for any PRS
Session (Chapter Five). In
addition to the absence of the
PRS Lesson selection option,
there are differences in the last
two settings on the dialog. You
can Automatically Advance the
Slide, rather than the Question,
and you can Ask Questions Only
Once. During the Slide Show,
you may have reason to go back
a slide or two. If a PRS Slide is
among the slides you go back
through, and you don't want to
77