Interwrite PRS User Manual page 41

Chapter 3
Response Map
Tab
Default Settings
Tab
A limitation of the IR environment that does not exist in the RF environment
is that there is no way to return receipt confirmation messages to the IR
Clickers. In that environment, user identification is displayed in a Response
Box to confirm that a Response from that user was received during a Session.
The Response Boxes are arranged in rows and columns on the screen,
making up the Response Grid. The Response Map acts as a virtual seating
chart, providing a fixed location in the Response Grid for each student's
Response Box, enabling him to easily locate his receipt confirmation. The
Response Grid and Response Map are not necessary in the RF environment
as messages confirming Response receipt are returned directly to the indi-
vidual RF Clickers. You can ignore the Response Map Tab when you are
defining a Class for RF.
Default settings for the Response Grid Window and the Results Chart
Window are established on this tab. These windows are displayed during
a Session.
As indicated above, the Response Grid is not used for an RF Class, so you
can ignore these settings. However, after each Question is presented
during a Session, you will most likely want to display the Results Chart to
show the Response distribution.
Classes – New RF Class Settings 39