Advertisement
At USB port of PC, please insert a RECEIVER like under the picture.
Power Supply :
Open a battery cover where there is at the bottom of TRANSM ITTER.
Insert the Batteries(AAA size, 2EA) after you check the polarity of + ,-.
ID Setting
After batteries is inserted, Powersenter is set by a default channel. But
we recommend ID setting for preventing an interference from other RF
device products.
Setting method is followed.
1st, push a button of Receiver. Receiver LED with a flash.
2nd. push a small button of Transmitter's bottom. Completion ID
setting.
3rd, confirm to push buttons of Transmitter whether ID Setting
was executed well.
4th, the end!!
Advertisement
