Table of Contents
Advertisement
TV+
2.
"
": select the type of tuner that you want to control with the IR
TV Receiver
Emitter ("
VCR
"
").
Digital TV
3.
"
Receiver brand
on the remote control to scroll the list faster.
4.
Select the "
Test power Off code
ARCHOS device will then try to turn your tuner off. After a few seconds, your
ARCHOS will ask you if the device responded correctly:
If your tuner turned off, select "
If your tuner did not turn off, select "
ing the tuner off again, using a different code. Repeat this operation until the
ARCHOS manages to turn the tuner off.
If none of the codes work, check that the ARCHOS is positioned in a way that
allows the infrared signal to reach your tuner's receiver. Note: In some rare
cases the ON/OFF functionality may not work.
2nd Test: changing channels on your tuner
After you select "
Yes
you to correctly set the parameters so that the ARCHOS can change channels on your
tuner (for a scheduled recording).
V0.9
MANUAL
", "
Cable/DSL box
": choose the brand of your tuner. You can use the
" at the end of the 1
", "
Satellite Receiver
" button. Make sure that your tuner is on. Your
", and move on to the next section.
Yes
No, try next code
st
test, the following screen appears. It allows
SCHEDULING A TV RECORDING > P. 68
", "
DVD Recorder
". Your device will try turn-
" or
buttons
Advertisement
Table of Contents
