Archos TV+ User Manual page 6

TV+
On the right side of the device:
See Transferring Files to learn how to connect the ARCHOS to a computer or to
a USB external device.
USING THE REMOTE CONTROL REMOTE CONTROL
1
This part of the remote control is used for the Web Browser and the Widgets.
Use the direction pad to move the cursor that appears on the screen.
Pressing this button will activate 2 modes at the same time:
-
the "left button lock" mode: the direction pad will act as if you moved
a mouse while holding its left button at the same time. It will allow
you, for example, to use sliders or other dragging controls.
-
the navigation buttons, at the top right, will allow you to move from
one link/field to another (normally they scroll the page up/down).
Press again to disable these 2 modes.
V0.9
MANUAL
A
USB Connector
(for USB Host)
•
•
B
USB Connector (for
computer connection)
You will need the remote control in order
to control your ARCHOS device.
Your ARCHOS device has an infrared re-
ceiver located on the front of the device,
on the left side (next to the LED indica-
tors). Point the supplied remote control
towards the infrared receiver.
INTRODUCTION > P. 5