System" Settings - Archos TV+ User Manual

TV+
2. Search for the latest firmware available for your ARCHOS.
3. Compare the latest on-line version with the one installed on your ARCHOS: your
ARCHOS' firmware version number appears in the "
tings screen (see: "Firmware and Plug-ins" Settings ).
4. If the on-line version is more recent than yours, follow the instructions to down-
load and install the new firmware.
Your Internet browser may warn you that the contents of the firmware file
could harm your computer. ARCHOS has taken precautions to insure that this
file will not harm your computer.

7.11 "SYSTEM" SETTINGS

"SYSTEM" SETTINGS
"Free Storage Space"
-
displays the amount of free space on the hard drive.
Note: reported number of megabytes is binary-based counting (1Kb=1024
bytes). Thus each reported Mb represents approximately 1.05 megabytes
(decimal), and each reported Gb represents approximately 1.07 gigabytes.
Formatting also takes up space.
"USB preference" (for advanced users)
-
Your preferred connection mode will be used every time you connect the
ARCHOS to a computer. The connection mode determines how your device inter-
acts with your computer:
- Mode 1: "
Windows Media Device
Player (WMP) version 10 or higher. When set to this mode, the ARCHOS uses the
Media Transfer Protocol (MTP). It allows you to charge your ARCHOS and transfer
files onto it at the same time. Your ARCHOS will be locked only when it is opened
in Windows® Explorer. You will be able to synchronize your media library auto-
matically every time you connect your ARCHOS to your computer. When your
file transfer is finished, simply unplug the cable from the ARCHOS, and your de-
vice will update the ARCLibrary (Music/Photo libraries).
V0.9
MANUAL
": Recommended for users of Windows Media®
MAIN SETTINGS > P. 61
Firmware and Plug-ins
" set-