Connecting the camera and a smartphone
Using a smartphone as a remote control for the camera
With Imaging Edge Mobile, you can shoot images while checking the
shooting range of the camera on the monitor of a smartphone.
1
MENU
(Network) [Ctrl w/ Smartphone]
[Ctrl w/ Smartphone], then select [On].
2
Set up the camera and smartphone by following the procedure
below.
To establish a one-touch connection with an NFC-enabled
smartphone
Activate the NFC function of the smartphone.
• On an iPhone/iPad, launch Imaging Edge Mobile, and then select
[Scan NFC/QR Code of the Camera] [Scan NFC of the Camera] to
activate the NFC function.
Switch the camera to the shooting mode.
Touch the
1-2 seconds.
• If you are using an Android smartphone, touch the
the camera to the
Note
• If you cannot connect the camera to the smartphone using the NFC
function, follow the procedure under "To establish a Wi-Fi connection with a
smartphone using a QR code."
(N mark) on the camera to the smartphone for
(N mark) on the smartphone.
(N mark) on
GB
195