Table of Contents
Advertisement
Noise reduction
Long Exposure NR
When you set the shutter speed to 1 second(s) or longer (long exposure
shooting), noise reduction is turned on for the duration that the shutter
is open. With the function turned on, the grainy noise typical of long
exposures is reduced.
MENU
desired setting.
On: Activates noise reduction for the same duration that the shutter is
open. When noise reduction is in progress, a message appears and you
cannot take another picture. Select this to prioritize the image quality.
Off: Does not activate noise reduction. Select this to prioritize the timing
of shooting.
Note
• [
Long Exposure NR] is not available when [
[Electronic Shutter].
• Noise reduction may not be activated even if [
[On] in the following situations:
– [Drive Mode] is set to [Cont. Shooting] or [Cont. Bracket].
• [
Long Exposure NR] cannot be set to [Off] in the following shooting
modes:
– [Intelligent Auto]
• Depending on the shooting conditions, the camera may not perform noise
reduction, even if the shutter speed is 1 second(s) or longer.
GB
134
(Camera Settings 1) [
Long Exposure NR]
Shutter Type] is set to
Long Exposure NR] is set to
Advertisement
Table of Contents
