Marker Settings
Marker Display
Sets whether or not to display markers set using [
the monitor or the viewfinder while shooting movies.
MENU
(Camera Settings 2) [
desired setting.
On: Markers are displayed. The markers are not recorded.
Off: No marker is displayed.
Note
• The markers are displayed when the mode dial is set to
when shooting movies.
• You cannot display markers when using [Focus Magnifier].
• The markers are displayed on the monitor or viewfinder. (You cannot output
the markers.)
Marker Settings
Sets the markers to be displayed while shooting movies.
MENU
(Camera Settings 2) [
desired setting.
Center: Sets whether or not to display the center marker in the center of
the shooting screen.
[Off] / [On]
Aspect: Sets the aspect marker display.
[Off] / [4:3] / [13:9] / [14:9] / [15:9] / [1.66:1] / [1.85:1] / [2.35:1]
Safety Zone: Sets the safety zone display. This becomes the standard
range that can be received by a general household TV.
[Off] / [80%] / [90%]
Guideframe: Sets whether or not to display the guide frame. You can
verify whether the subject is level or perpendicular to the ground.
[Off] / [On]
Hint
• You can display several markers at the same time.
• Place the subject on the cross point of the [Guideframe] to make a balanced
composition.
Marker Settings] on
Marker Display]
(Movie) or
Marker Settings]
, or
GB
153