Shutter Awb Lock - Sony a9 Instruction Manual

Interchangeable lens
Hide thumbs Also See for a9:
Table of Contents

Advertisement

Note
• The message [Capturing of the custom WB failed.] indicates that the value is
in the unexpected range, for example when the subject is too vivid. You can
register the setting at this point, but it is recommended that you set the white
balance again. When an error value is set, the indicator
the recording information display. The indicator will be displayed in white
when the set value is in the expected range.
• If you use a flash when capturing a basic white color, the custom white
balance will be registered with the lighting from the flash. Be sure to use a
flash whenever you shoot with recalled settings that were registered with a
flash.
 Shutter AWB Lock
You can set whether or not to lock the white balance while the
shutter button is pressed when [White Balance] is set to [Auto] or
[Underwater Auto].
This function prevents unintentional changes to the white balance during
continuous shooting or when shooting with the shutter button pressed
halfway down.
MENU 
desired setting.
Shut. Halfway Down: Locks the white balance while the shutter button
is pressed halfway down, even in the auto white balance mode. The
white balance is also locked during continuous shooting.
Cont. Shooting: Locks the white balance to the setting in the first shot
during continuous shooting, even in the auto white balance mode.
Off: Operates with the normal auto white balance.
GB
126
 (Camera Settings 1)  [
turns orange on
 Shutter AWB Lock] 

Advertisement

Table of Contents
loading

Table of Contents