Ocean Digital WR-10 User Manual page 15

Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation between
different countries. Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi-Fi
performs satisfactory.
We have already set the channels according to the requirement in different countries. Choose
the country you are staying from the list to get the correct channel.
The Europe/United Kingdom is set by default, press [OK] on the Remote control or push the
[Tune/Select] knob to edit the country selection.
LAN Network
Connect the Tuner's Ethernet port to one of the LAN ports in a router or Wi-Fi router using CAT
5 or CAT 6 cable. If your Router or Wi-Fi router is DHCP-enabled (recommended), you don't
have anything to setup and the Tuner will connect to Internet with the parameters
automatically assigned by the Router/Wi-Fi router.
Use the remote control for configuration if you want to use a fixed IP, scroll to IP:[Dynamic] and
press OK. Choose Fixed. Press the ▲ button, you can then enter the IP, press ▲, ▼ to tune to
the required numbers: xxx.xxx.xxx.xxx. Switch among the 4 groups by pressing ◄► . When
done, press OK. Scroll to GW and NM to do the same.
You can also choose to use a DNS server other than the one from the DHCP server. Scroll to
DNS and do the same.
Note - Use DHCP to get the network parameters unless you are familiar with network setup.
Date and Time
The radio will set your local time automatically after the internet connection is completed. If
you want to do manual setting, change it by the following options:
• Time zone
Auto-set Time Zone: This option is set by default.
Manual-set Time Zone: Choose this option if you want to set the time in another region.
• Set Time Format
Choose either 12-hour or 24-hour notation you prefer.
• Set Date Format
• DST (Day Light Saving)
Enable on/off
• NTP (Use network time)
NTP is designed to synchronize a device's clock with a time server. Your Tuner will
synchronize the time server by default every time it powers up and connects to Internet. This
ensures a very high degree of accuracy in the Tuner's clock. You can change to use other
Choose and highlight the region/city you prefer and press OK to
confirm.
Coupled with NTP (use network time) and DST (Daylight time saving)
will be adjusted automatically if you choose to use network time
(NTP).
- 13 -