Related Manuals for Ocean Digital WR-10
Summary of Contents for Ocean Digital WR-10
- Page 1 UserManual Internet Radio Tuner WR-10 Please read this user manual carefully before using the receiver...
-
Page 2: Table Of Contents
Contents Location of Controls............1 Remote control..............2 How to input security code for your wireless network..3 1. To start up..............5 2. Network Setup............5 3.Overview of features and functions......6 4. Internet Radio............7 5. Media Centre............9 6. DAB+/DAB Radio............9 7. FM Radio...............10 8. Bluetooth playback..........11 9. -
Page 3: Location Of Controls
Location of Controls Name Operation Power button Press to enter/exit from Standby mode 6.35 mm Headphone output with volume Headphone jack controlled by dial (with line-out, volume is controlled by amplifier) Power LED Lit when DC-in has valid power Receives Infra red signal from remote control IR sensor 2.4”TFT color display Press to display main menu to view different... -
Page 4: Remote Control
Remote control : Mute 2. 0-9: Input index number on the list / input characters for WiFi security code : Preset the current playing station to Favorite 4. ▲ : Cursor up 5. ◄ : Cursor left / back to previous menu : Alarm button : Sleep Timer 8. -
Page 5: How To Input Security Code For Your Wireless Network
How to input security code for your wireless network Using remote control On the alpha-numerical keypad, press each button repeatedly to cycle through the letters, numbers and symbols as listed below. To input a character, scroll to the correct one and when it is highlighted, press the ► button to input the next character. - Page 6 Before you start Please ensure the following is ready: You have a broadband internet connection. A wireless broadband router is connected to the internet successfully. The radio supports Wireless B, G and N connection (Wireless N router can also be used with the setting on B or You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption code/password.
-
Page 7: To Start Up
1. To start up • Remove internet radio tuner (called Tuner hereafter) from the package box. • Plug in the DC adapter and switch the Power on/off switch (on the rear cabinet) to ON. Press ] button on the front (Power LED will be briefly lit). ◦... -
Page 8: Overview Of Features And Functions
• When the Wi-Fi connection is successful, the Association Complete will be shown briefly. The wifi signal bar will appear on the top left corner of the display: Wi-Fi signal bar 3. Overview of features and functions Press [Menu/ ] to enter the main menu or the on the remote control. -
Page 9: Internet Radio
4.InternetRadio On the main menu, choose Internet Radio and you will find the options below: Skytune Search History Skytune Select Skytune to start enjoying thousands of radio stations over the world. You can filter your search by Region, Music genre and talks. The Local Radio let you access quickly the stations available in your local area through internet connection. - Page 10 Every time you press the ► button, it will show various information at a time such as the streaming bit rate, name of the song, artist name (if available), the big time clock and the radio's station logo (if available): My Favorite This is to show the list of your Favorite stations which have been assigned to the presets.
-
Page 11: Media Centre
5. Media Centre The device supports UPnP and is DLNA-compatible. This provides the opportunity to stream music from your network. However, this requires you to have a compatible device in your network that can function as a server. This can be e.g., a network hard drive or a conventional PC with e.g., Windows 8 via which access to the shared folder or media sharing is permitted. -
Page 12: Fm Radio
You can select the channel and start listening to it. Whenever you want to add to My Favourite, press the button and it will add to the favourite list. Always press the [ ◄ ] button (or [Back/ ◄ ] on the unit) to return to the Preset list. Note - When a DAB radio is playing, press the [ ►... -
Page 13: Bluetooth Playback
• Switch your Bluetooth device to which you want to connect the radio on and activate the pairing mode here. The device scans for Bluetooth devices in the reception range. • When the radio is found, your bluetooth device shows its name WR-10-XXXX (the XXXX is an identification code for your radio unit). -
Page 14: Sleep Timer Setting
Alarm Volume - Adjust the volume of the alarm as you like by rotating the [Tune/Select] knob or [▲/▼] button on remote. After the above settings are completed, press the [ ◄ ] button to exit and make sure the Alarm is turned on. - Page 15 Wi-Fi Channels Not all of the Wi-Fi channels are available in every country. There may be variation between different countries. Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi-Fi performs satisfactory. We have already set the channels according to the requirement in different countries. Choose the country you are staying from the list to get the correct channel.
- Page 16 time server by inputting the URL address (see below NTP server). You can choose "Do not use network time" if you don't want it to. If you choose not to use NTP for clock synchronization, highlight the NTP (Network time protocal) and press OK to make the change.
- Page 17 Playback Setup This is to set the mode of playback under UPnP/DLNA compatible streaming: Repeat All, Repeat Once or Shuffle. Resume when Power on This function is ON by default. The radio will resume to the last state of mode when the radio is power on next time, e.g.
-
Page 18: Remote Control Via Pc / Smart Phone
12. Remote control via PC / Smart phone - Tuning internet radio & manage favourite Experience an easy way to control tuning internet radio channels and manage your favourite list via PC or Smart phone's web browser. The supported browsers are Internet Explorer and Chrome. - Connect your PC or Smart phone to the same Wi-Fi network as your radio. - Page 19 - It will prompt you whether to "Add Favourite" or "Listen to Station". Enter the IP address of your radio (e.g. 192.168.1.11): The IP address can be located on the radio unit as follow: * On the remote control, press the [Info] button, choose Network and scroll to IP to view the IP address * On the radio, return to the main menu.
- Page 20 You can also add the radio channel if you know the published audio stream URL with the streaming format as follow: 1. Transport: HTTP progressive like HLS and HTTP like Shoutcast, Icecast 2. Audio: MP3, AAC, AAC+, FLAC 3. Playlist: M3U, PLS - 18 -...
-
Page 21: Trouble Shooting
13. Trouble Shooting Problem Cause Solutions • Confirm that a Wi-Fi or Ethernet Wired connected PC can access the internet (i.e. can browse the web) using the same network. • Check that a DHCP server is available, Network down or that you have configured a static IP address on the radio. -
Page 22: Helpful Tips
1. If the Internet Radio keeps re-buffering radio station: The Internet Radio is streaming the data from the radio station via your broadband connection, if there is a high error rate on your broadband connection, or the connection is intermittent, then it will cause the Internet Radio to pause until the connection is re- established and it has received enough data to start playing again. -
Page 23: Technical Specification
This system is financed by the industry and ensures environmentally responsible disposal and the recycling of valuable raw materials. Ocean Digital Technology Ltd. Flat B, 12/F., Yeung Yiu Chung (No.8) Ind. Bldg., 20 Wang Hoi Road, Kowloon Bay, Hong Kong Email: support@oceandigital.com.hk...