Personal Safety; Service; System Set-Up - Kenwood TK-2317 Service Manual

TK-2317

PERSONAL SAFETY

The following precautions are recommended for personal
safety:
• DO NOT transmit until all RF connectors are verifi ed se-
cure and any open connectors are properly terminated.
• SHUT OFF and DO NOT operate this equipment near
elec tri cal blasting caps or in an explosive atmosphere.
• This equipment should be serviced by a qualifi ed tech ni -
cian only.

SERVICE

This transceiver is designed for easy servicing. Refer
to the sche mat ic diagrams, printed circuit board views, and
align ment procedures contained within.
Model Type TX-RX unit
TK-2317 C X57-7880-20 136~174MHz
Merchandise received
Choose the type of transceiver
选择手持对讲机的类型
Transceiver programming
Are you using the optional antenna?
您使用可选件天线吗 ?
Are you using the speaker microphone?
您使用扬声器麦克风吗 ?
4
Frequency
Remarks
range
IF1: 49.95MHz
LOC: 50.4MHz
SYSTEM SET-UP / 系统体系
接收订单
手持对讲机编程
( 为手持对讲机设定频率， 常规系统特性， TX 高 / 低功率， 以及信令数据。 )
否
NO /
否
NO /
Delivery
交货
个人安全
个人安全为了个人的安全，请注意下列事项∶
• 在没有认真核实所有射频插头之前或有任何一个脱开的插
头没有连接到相应端口上的情况下均不要发射。
• 在电爆管附近或在易燃性气体环境中，必须关闭电源，不
要操作本设备。
• 本设备只应该由有资格的技术人员进行维修。
维修服务
为了便于维修本设备，建立了完整的维修服务体系，提供
了包括原理图，印刷电路板图和调整步骤在内的资料供参考。
型 号 类型
TK-2317 C
Frequency range (MHz)
频率范围 (MHz)
TX/RX 136~174
A personal computer, programming interface (KPG-22/22A),
and FPU (programming software) are required for programming.
(The frequency, TX power HI/LOW, and signaling data are
programmed for the transceiver.)
编程时需要个人计算机，编程接口 (KPG-22/22A) 和 FPU( 编程软件 )。
是
YES / KRA-22 or KRA-26 Optional antenna
KRA-22 或 KRA-26 可选件天线
是
YES / KMC-21, KMC-45 or KMC-48GPS Speaker microphone
KMC-21,KMC-45 或 KMC-48GPS 扬声器麦克风
收发单元 频率范围
IF1: 49.95MHz
X57-7880-20 136 ～ 174MHz
LOC: 50.4MHz
RF power Type
射频功率 类型
5.0W TK-2317C
(Option)
( 可选件 )
备 注