Download Print this page

SMSC LPC47S45x Specification Sheet

Advanced i/o with x-bus interface

Advertisement

Quick Links

Advanced I/O with X-Bus Interface
3.3 Volt Operation (5V tolerant)
Floppy Disk Controller (Supports 2 FDCs)
Multi-Mode Parallel Port
Two UARTs
8042 Keyboard Controller
SMBus Controller
- SMBus access to LCD Interface
- SMBus Serial Port 2 Interface Disable
- SMBus access to Power On Elapsed Time
Counters
- Programmable Slave Address
X-Bus Interface
- Supports up to four external I/O components
- Offers two modes of operation
- Support for Driving LCD Panel Interface
Controller
- Supports Port 80h "Snooping"
Programmable Wakeup Event Interface (IO_PME#
Pin)
SMI Support (IO_SMI# Pin)
GPIOs (55)
Fan Controller
- One Fan Speed Control Output
- One Fan Tachometer Input
ISA IRQ to Serial IRQ Conversion
XNOR Chain for Board Test Mode
PC2001 and ACPI 2.0 Compliant
128-pin QFP Package
ISA Plug-and-Play Compatible Register Set
Intelligent Auto Power Management
Power On Elapsed Time Counters
- Counter for Main Power
- Counter for Standby Power
Real Time Clock
- MC146818 and DS1287 Compatible
- 256 Bytes of Battery Backed CMOS in Two 128-
Byte Banks
- 128 Bytes of CMOS RAM Lockable in 4x32 Byte
Blocks
- 12 and 24 Hour Time Format
- 24-hour daily alarm
- 30-day alarm
- Binary and BCD Format
- <1µA Standby Current (typ)
SMSC LPC47S45x
FEATURES
1
PRODUCT PREVIEW
2.88MB Super I/O Floppy Disk Controller
- Licensed CMOS 765B Floppy Disk Controller
- Software and Register Compatible with SMSC's
Proprietary 82077AA Compatible Core
- Configurable Open Drain/Push-Pull Output
Drivers
- Supports Vertical Recording Format
- 16-Byte Data FIFO
- 100% IBM Compatibility
- Detects All Overrun and Underrun Conditions
- Sophisticated Power Control Circuitry (PCC)
Including Multiple Powerdown Modes for
Reduced Power Consumption
- DMA Enable Logic
- Data Rate and Drive Control Registers
- 480 Address, up to 15 IRQ and Four DMA
Options
Enhanced Digital Data Separator
- 2 Mbps, 1 Mbps, 500 Kbps, 300 Kbps, 250 Kbps
Data Rates
- Programmable Precompensation Modes
Keyboard Controller
- 8042 Software Compatible
- 8-Bit Microcomputer
- 2k Bytes of Program ROM
- 256 Bytes of Data RAM
- Four Open Drain Outputs Dedicated for
Keyboard/Mouse Interface
- Asynchronous Access to Two Data Registers and
One Status Register
- Supports Interrupt and Polling Access
- 8-Bit Counter Timer
- Port 92 Support
- Fast Gate A20 and KRESET Outputs
Serial Ports
- Two Full Function Serial Ports
- High Speed NS16C550A Compatible UARTs with
Send/Receive 16-Byte FIFOs
- Supports 230k and 460k Baud
- Programmable Baud Rate Generator
- Modem Control Circuitry
- 480 Address and 15 IRQ Options
- IrDA 1.0, HP-SIR, ASK IR Support
LPC47S45x
Rev. 04-30-07

Advertisement

loading
Need help?

Need help?

Do you have a question about the LPC47S45x and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SMSC LPC47S45x

  • Page 1 - <1µA Standby Current (typ) SMSC LPC47S45x FEATURES 2.88MB Super I/O Floppy Disk Controller - Licensed CMOS 765B Floppy Disk Controller - Software and Register Compatible with SMSC's Proprietary 82077AA Compatible Core - Configurable Open Drain/Push-Pull Output Drivers - Supports Vertical Recording Format...
  • Page 2: Ordering Information

    Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com.
  • Page 3: General Description

    SMBus controllers, a fan speed control output, a fan tachometer input and four ISA IRQs that can be routed to any of the serial IRQs. The LPC47S45x also provides Power on Elapsed Time counters for Main Power and Standby Power, power supply on/off control, and a Real Time Clock.
  • Page 4: Pin Configuration

    RDATA# GP42/IO_PME# CLOCKI LAD0 LAD1 LAD2 LAD3 LFRAME# LDRQ# PCI_RESET# LPCPD# GP43/DDRC PCI_CLK SER_IRQ GP80 GP81 GP82 GP83 SMSC LPC47S45x LPC47S45x 128 PIN QFP PRODUCT PREVIEW GP56/nCTS2 GP55/nRTS2/SADR0 GP54/nDSR2 GP53/TXD2/IRTX GP52/RXD2/IRRX GP51/nDCD2 GP50/nRI2 nDCD1 nRI1 nDTR1 nCTS1 nRTS1 nDSR1 TXD1...
  • Page 5 Maximum mold protrusion is 0.25 mm. Dimension for foot length L measured at the gauge plane 0.25 mm above the seating plane. Details of pin 1 identifier are optional but must be located within the zone indicated. SMSC LPC47S45x 3.05 24.10 20.10...