Table of Contents
Advertisement
Quick Links
EVB-EMC1002/EMC1033 User Manual
The information contained herein is proprietary to SMSC, and shall be used solely in accordance with the agreement pur-
suant to which it is provided. Although the information is believed to be accurate, no responsibility is assumed for inaccura-
cies. SMSC reserves the right to make changes to this document and to specifications and product descriptions at any
time without notice. Neither the provision of this information nor the sale of the described semiconductor devices conveys
any licenses under any patent rights or other intellectual property rights of SMSC or others unless specifically specified oth-
erwise. The product may contain design defects or errors known as anomalies, including but not necessarily limited to any
which may be identified in this document, which may cause the product to deviate from published specifications. SMSC
products are not designed, intended, authorized or warranted for use in any life support or other application where product
failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written
approval of an officer of SMSC will be fully at the risk of the customer. SMSC is a registered trademark of Standard Micro-
systems Corporation ("SMSC").
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST
INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR
USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL,
PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY
KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF
SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REM-
EDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SMSC EMC1002/EMC1033
Revision 1.1 (12-14-06)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SMSC EVB-EMC1002
Summary of Contents for SMSC EVB-EMC1002
- Page 1 Any and all such uses without prior written approval of an officer of SMSC will be fully at the risk of the customer. SMSC is a registered trademark of Standard Micro- systems Corporation (“SMSC”).
-
Page 2: Related Documents
(EVB). The EMC1033 has an additional feature, “Anti-Parallel Diode” (APD) support which allows the connection of two diodes to the EMC1033’s DP/DN inputs in opposite polarity. The EVB-EMC1002 and EVB-EMC1033 are USB-based platforms for evaluating the EMC1002/1033. A block diagram of the EVB is shown in... -
Page 3: Getting Started
USB driver installation. Follow the instructions in the readme.txt file to complete the installation process. 3. Start the EVB Software by selecting the Register Manager application from the SMSC folder from the Programs Windows Start menu. The EVB will initialize and the Register Manager Help screen... - Page 4 Manager software only needs to be installed once to support all of these EVBs. The list of supported EVBs may be found in the readme.txt file included on the distribution CD. Figure 2.2 Register Manager Help Screen Revision 1.1 (12-14-06) EVB-EMC1002/EMC1033 User Manual SMSC EMC1002/EMC1033...
-
Page 5: Circuit Description
EVB-EMC1002/EMC1033 User Manual 3 Circuit Description Introduction The EMC1002 EVB provides the means to demonstrate EMC1002/1033 features and to view and modify registers. LED Indicators and test points are included to show status information and a fan driver circuit linearly drives a 5V fan to 3 different speeds based on programmable temperature limits. -
Page 6: Test Points
LEDs indicate the status of the following signals: , EMC1002/1033 pin 6 Alert/Therm2 , EMC1002/1033 pin 4 Addr Therm +3.3V USB Activity - blinking indicates USB traffic Bridge Activity, when ON indicates the Bridge is functioning Revision 1.1 (12-14-06) EVB-EMC1002/EMC1033 User Manual SMSC EMC1002/EMC1033... - Page 7 EVB-EMC1002/EMC1033 User Manual 4 Demo Description Register Manager Overview The Register Manager application (RegMan) initially displays the main Help screen, where detailed description of the application’s features may be found. The Help screens can be displayed at any time by selecting Help from the menubar or pressing the ? button on the toolbar. RegMan enables the user to display temperature readings, set temperature limits and read/write configuration register values.
- Page 8 Addr Therm is configured as a output, temperatures exceeding the High Temp Therm2 C. Replace the jumper and the temperature will return to its correct reading. EVB-EMC1002/EMC1033 User Manual is low. The SMBus Addr Therm output will stay Alert/Therm2 output...
Need help?
Do you have a question about the EVB-EMC1002 and is the answer not in the manual?
Questions and answers