Adding Frequencies To A Car Number; Adding A Car Number To The Channel; Viewing Frequencies Associated With A Car Number - Radio Shack PRO-99 Owner's Manual

3. Enter the frequency (including the decimal point) you want to associate with the car number by using the
number keys and ./CLEAR.
4. Press ENT to store the frequency. The car number and frequency are stored in the first available channel.

ADDING FREQUENCIES TO A CAR NUMBER

1. Press and hold FUNC for about 2 seconds. Then press 2 and 1. Input Car#? appears.
2. Use the number keys to enter the car number if the number is three digits. If the car number is less than
three digits, enter the car number then press ENT. The car number and the first frequency associated with
that number appear.
3. Repeatedly press ^ or v until 0.00000 MHz appears.
4. Enter the frequency (including the decimal point) you want to associate with the displayed car number by
using the number keys and ./CLEAR.
5. Press ENT to store the frequency. The frequency is associated with the car number entered.

ADDING A CAR NUMBER TO THE CHANNEL

You can assign the car number after you program the frequency into the channel.
1. Press and hold FUNC for about 2 seconds. Then press 2 and 2. Channel number (and car number if you
entered) appears.
2. Select the channel you want to use to store the car number by using the number keys and ENT.
3. Press 3 to select 3:Program Car#.
4. Enter the car number by using the number keys.
5. Press ENT to store the new car number.

VIEWING FREQUENCIES ASSOCIATED WITH A CAR NUMBER

1. Press and hold FUNC for about 2 seconds. Then press 2 and 1. Input Car#? appears.
2. Enter the car number. If the number is one or two digits, enter the number then press ENT. If the number is