Locking Out Channels Or Frequencies - Radio Shack PRO-99 Owner's Manual

LOCKING OUT CHANNELS OR FREQUENCIES

You can lock out channels to force the scanner to skip and ignore any traffic while scanning. You can also
lock out up to 50 frequencies while searching to skip undesired transmissions.
Locking Out Channels
To lock out a channel while scanning, press FUNC then press 3/L/OUT when the scanner stops on the
channel.
To lock out a channel manually, select the channel then press FUNC, 3/L/OUT so L appears in the display.
Note: You can still manually select and monitor locked-out channels.
To remove the lockout from a channel, manually select the channel and press FUNC then press 3/L/OUT so L
disappears.
Reviewing the Lock-Out Channels
To review all locked out channels, press and hold FUNC for about 2 seconds then press 5 and 1. Repeatedly
press ^ or v to advance to the next locked out channel.
Note: If you want to remove the lockout from a channel, simply press 3/L/OUT to remove the lockout.
Clearing All Lockout Channels
To clear all lockout channel(s) as follows:
1. Press and hold FUNC for about 2 seconds then press 5 and 1.
2. Press and hold ./CLEAR for about 2 seconds. Confirm list clear? 1 -> YES. Other key -> No. appears on
the display.
3. Press 1 to clear the all lockout channels, or press any key other than 1 to cancel clear.
Locking Out Search Frequencies
To lock out a frequency during a search, press FUNC then press 3/L/OUT when the scanner stops on that
frequency. The scanner will lock out the frequency and continues searching.
Notes: