Electrolux EWF 1268 Instruction Booklet page 18

6. Select the temperature
Press the TEMPERATURE button if you wish to
select a temperature value different from the one
proposed by the washing machine.
The relevant light will light up.
95°C
60°C
40°C
30°C
COLD
TEMPERATURE
7. Select the SPIN SPEED or the
RINSE HOLD option
Press the SPIN SPEED button repeatedly, in order
to select the desired spin speed or the RINSE HOLD
option. The relevant light will light up.
If you select the RINSE HOLD option, the machine
will stop at the end of the programme with the water
still in the tub.
1200
900
700
500
RINSE HOLD
SPIN SPEED
8. Select the desired options
Press the OPTIONS buttons so as to cause one or
both of the lights to light up.If your laundry is very
dirty, it may be advisable to select the PREWASH.
Select EXTRA RINSE, if you wish to rinse your
laundry with more water.
If you need a silent cycle, select the NIGHT CYCLE
option that ends with water in the tub.
NIGHT CYCLE
ECONOMY
QUICK WASH
If your laundry is only slightly soiled, select
ECONOMY or QUICK WASH option. The relevant
light illuminates.
9. Select the DELAY START
Before you start the programme, if you wish the
starting to be delayed, press the DELAY START
button repeatedly, or keep it pressed, to select the
desired delay. The selected delay time value (up to
23 hours) will appear on the display for 3 seconds,
then the duration of the programme will appear
again.
10. Start the programme
Press the START/PAUSE button. The relevant light
will stop flashing and only the light relevant to the
phase that is in progress will remain lit.
If you have chosen a delayed start, the washing
machine will begin the countdown.
The display will show the duration of the programme
or the selected delay.
11. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change options, spin speed and
PREWASH
temperature before the programme carries it out.
To change a programme that is being carried out, it
EXTRA RINSE
is necessary to cancel the cycle and select a new
programme. The water in the tub will be not drained.
To cancel a programme that is being carried out, first
pause the washing machine by pressing the
START/PAUSE button, then press the SKIP RESET
button repeatedly, until the display shows three
blinking dashes.
18
Delay
Start
START/PAUSE