Text Input Chart - Radio Shack PRO-162 User Manual

5. You can store same as channel text tag.

text input chart

User can use the number keypad on scanner to enter text by referring to the alphabet
printed on each number key. When user presses the number key in the text entry field, the
scanner displays the first alphabet printed on the number key. Press the number key twice
to display the second alphabet and three times to display the third. When user wants to
input the small letter, press [A/a] to switch the capital letter and small letter.
For example, to enter "Scanner":
1. Press [7/PQRS] 4 times to enter "S".
2. Press [A/a] to switch the capital letter and small letter.
3. Then press [2/ABC] 3 times to enter "c".
4. Press [? ] to move cursor.
5. Press [2/ABC] 1 times to enter "a".
6. Press [6/MNO] 2 times to enter "n".
7. Press [? ] to move cursor.
8. Press [6/MNO] 2 times to enter "n".
9. Press [3/DEF] 2 times to enter "e".
10. Press [7/PQRS] 3 times to enter "r".
11. Press [ENT] to end your text entry.
Keys 0
1 .
2/ABC A
3/DEF D
4/GHI G
5/JKL J
6/MNO M
7/PQRS P
8/TUV T
9/WXYZ W
0
Space
Press A/a to choose the input mode. (Capital letter, Small letter, Numeric)
programming channel CTCSS/DCS code
Your scanner can monitor systems using a Continuous Tone Coded Squelch System
(CTCSS) and Digital Coded Squelch (DCS) system, which allow squelch to open only when
the tone you have programmed with a specific frequency is received along with a
transmission.
1. Press ENT/PGM to put the scanner in programming mode.
2. Enter the channel number where you want to store a CTCSS/DCS code. If you make a
mistake, press CL repeatedly until the display is cleared.
3. Press MAN to advance the channel.
Number of times key is pressed
1 2 3
( ) -
B C 2
E F 3
H I 4
K L 5
N O 6
Q R S
U V 8
X Y Z
# ? _
4 5 6
+ * /
7
9
, $ %
7 8 9
@ ^ &
! ~ '
6