Assembly Instructions - Weston 03-1200-W Manual

ASSEMBLY INSTRUCTIONS

1. Place base on a stable, flat
surface. Insert oil pot into base. (FIGURE 1)
2. Align grooves of heating element
assembly with grooves on base.
Push down on heating element
assembly to connect it to the
base. (FIGURE 2)
NOTE: Heater cannot be turned
on unless correctly installed on
base.
3. To assemble handle, squeeze
tines of handle together. Align
tines with round holes on metal
bracket of basket. (FIGURE 3)
4. Release tines to allow them to
spread and then pull handle back
to lock into metal bracket. (FIGURE 4)
5. For storage: Squeeze tines
together and then rotate handle
into basket. (FIGURE 5)
6. Align vent cover and vent of
lid toward heating element
assembly. Lid snaps into place. (FIGURE 6)
6
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6