Electro-Voice REV-BP User Manual

Preliminary Users Manual
Electro-Voice Model REV-BP Wireless Microphone Transmitter
The Electro-Voice (Ev) REV-BP is a Professional Grade Wireless Beltpack
Transmitter operating in the UHF frequency range. The REV-BP combines
frequency agility and ease of use like no other. The transmitter operates
within a 24 MHz wide segment in 25 KHz steps.
The high quality audio circuitry and advanced Radio Frequency (RF) signal
processing offer broadcast quality signal-to-noise and audio clarity.
System features include:
• Durable Painted Metal Case.
• TA-4F Audio Connector.
• Permanent Flash Memory for frequency/setting storage.
• On-Loc prevents accidental power off (when set).
• LCD Display for ease of viewing.
• Flexible quarter wave screw-on Antenna.
Quick set-up:
1. With the Power Switch on the transmitter OFF, install a fresh battery into
the transmitter.
2. To prevent feedback or unintentional noise, mute the audio
mixer/amplifier or other device during set-up adjustments.
Place the transmitter Power Switch to the ON position.
3. The Battery light near the Off/On switch will flash once and then go off.
The display will also come on briefly displaying the current frequency
group and channel and the battery level. Note: Anytime Power is
removed and turned back on, the GP/CH/Bat screen will be displayed.