Electro-Voice CSH-1000 Preliminary User's Manual
Electro-Voice CSH-1000 Preliminary User's Manual

Electro-Voice CSH-1000 Preliminary User's Manual

Wireless microphone transmitter, ev band c frequencies

Advertisement

Preliminary Users Manual
Electro-Voice Model CSH-1000 Wireless Microphone Transmitter
(Ev Band C frequencies)
The Electro-Voice (Ev) CSH-1000 Is a Professional Grade Wireless
Transmitter operating within the frequency range of 776.0 MHz to 800.000
MHz. ( Ev Band C frequencies).
The CSH-1000 combines frequency agility and ease of use like no other.
The transmitter operates within a 24 MHz wide segment in 25 KHz steps.
The high quality audio circuitry and advanced Radio Frequency (RF) signal
processing offer broadcast quality signal-to-noise and audio clarity.
System features include:
• Over-molded Warmgrip ™ handle.
• Interchangeable microphone heads.
• Smart Battery circuit, accepts either polarity orientation.
• Permanent Flash Memory for frequency/setting storage.
• On-Loc prevents accidental power off.
• LCD Display for ease of viewing.
• Internal Antenna.

Quick set-up:

1. With the Power Switch on the transmitter OFF, install a fresh battery into
the transmitter.
2. Place the transmitter Power Switch to the ON position.
3. The Red Battery light near the display will flash on once and then off.
The display will also come on briefly displaying the battery level.
4. The screen will stop at the GP (Group) and CH (Channel) screen. If the
Group and Channel match the desired receiver group and channel,
Proceed to Step 7. If not, proceed to Step 5.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CSH-1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Electro-Voice CSH-1000

  • Page 1 Transmitter operating within the frequency range of 776.0 MHz to 800.000 MHz. ( Ev Band C frequencies). The CSH-1000 combines frequency agility and ease of use like no other. The transmitter operates within a 24 MHz wide segment in 25 KHz steps.
  • Page 2 CSH-1000 Users Manual Page 2 Quick set cont’d. 5. To select a different GP/CH, press MENU if required to get to the GP/CH display. Press the SET button once and the Group number will flash. Use the up and down arrows to change the group number. Press the SET button to save the Group.
  • Page 3 CSH-1000 Users Manual. Page 4 Approval Information: The Telex/Ev CSH-1000 Transmitter is Type Accepted under United States Federal Communications Commission Part 74. The Telex/Ev CSH-1000 Transmitter is Certified to Industry Canada RSS123 rules. Licensing of Telex/Ev equipment is the users responsibility and licensability depends upon the user’s classification, user’s application...

Table of Contents