Advertisement
INSTALLATION INSTRUCTIONS
Feed the supply hoses, stud and lift rod
through faucet hole of the lavatory or mounting
surface.
Slide the washer over the mounting stud and
secure the faucet to the lavatory or mounting
surface by threading the nut onto the mounting
stud.
If the lavatory is not installed, install it at this time.
Follow the lavatory manufacturer's instructions.
Connect the supply hoses to the supply stops. (Left is
hot - right is cold.)
Wrench-tighten all connections.
1072008-2-B
Page 3 of 4
2. INSTALL THE FAUCET
Supply Hoses
3. CONNECT THE SUPPLIES
Questions? Problems? For additional assistance, please contact Kallista's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Single Control Lav Faucet
P24300, P24301
Mounting Stud
Lift Rod
Lavatory or
Mounting Surface
Washer
Nut
Supply
Hose
Supply
Stop
Advertisement
