Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ezviz CS-LC1-A0-1B2WPFRL
Summary of Contents for Ezviz CS-LC1-A0-1B2WPFRL
- Page 1 Quick Start Guide...
- Page 3 What's in the Box Wire Connector (x3) Long Bracket Screw (x1) Mounting Bracket (x1) Short Mounting Screw (x2) Floodlight Camera Gasket (x1) Short Base Screw(x1) Screwdriver (x1) Quick Start Guide (x1) Floodlight Camera Bracket Screw Wire Connector Mounting Base Mounting Base Screw IP65 Junction Box Mounting Bracket Gasket...
- Page 4 Floodlight Camera Installation Step1 Step2 Shut down the electricity at the breaker that controls floodlight camera's Pull the floodlight camera completely off the base. circuit. Unscrew the mounting base screw, then press the bottom button all the way down ,and pull the string to take the mounting base off.
- Page 5 Step7 Step8 Mount the base with the provided long bracket screw through the center screw-hole. Mount the Floodlight Camera to the base plate. Adjust the camera position and ersure the top screw-hole matches the one on the base. Mount the camera to the base with the mounting base screw in the top base.
- Page 6 Appendix Install Memory Card (Optional) - Remove the door on the side of the camera. - Remove the silicone plug. - Insert a microSD card into the slot until a click. - Put the silicone plug back and make sure it is fully plugged in the SD card slot. - Place the door cover back on.
- Page 7 UD12652C...
Need help?
Do you have a question about the CS-LC1-A0-1B2WPFRL and is the answer not in the manual?
Questions and answers