Juniper C2000 Hardware Manual page 26

C2000 and C4000 1.0.x Hardware Guide
Unpacking the Units
The systems are delivered boxed. For your convenience, we recommend that you
unpack the system in the location where you want to install it.
WARNING: Three people are required to install the system in a rack: two to lift it
into position and one to screw it to the rack.
Inspecting System Components and Accessories
After you remove the equipment from the shipping containers:
If You Detect or Suspect Damage
If you detect or suspect damage to any equipment:
Contacting Juniper Networks
Please contact Juniper Networks at 1-888-314-JTAC (from the United States, Canada,
or Mexico) or 1-408-745-9500 (from elsewhere), or contact your sales representative
if you have any questions or concerns. See
Hardware"
The Next Step
12
Unpacking the Units
Confirm the contents of each container.
Inspect all external surfaces and external connectors for visible signs of damage.
Inspect all accessories shipped with each unit.
Document any damage noted during your inspection.
Confirm that the system has the correct number and type of components for
your ordered configuration.
Contact the shipper responsible for delivery, and formally report the damage.
Contact your Juniper Networks sales representative or reseller.
on page 53 for complete contact information.
To familiarize yourself with the electrical, environmental, and other guidelines
and requirements for installing the system, see
on page 43.
Requirements
If you are familiar with these guidelines and requirements, see
Cabling the C-series Platform
"Contacting Customer Support and Returning
Installation Guidelines and
on page 13.
Installing and