DeLOCK 89379 User Manual page 6

English
13. Press Submit.
14. The MSU displays the Property tab for the HyperDuo virtual disk and begins
initialization. It takes up to some minutes to complete. System performance
may slow during this period.
1. If you want to quickly create a HyperDuo virtual disk, select Quick Create
Wizard.
2. Select Safe mode or Capacity mode, and then press Submit. The MSU will
help you create the HyperDuo virtual disk automatically.
1.
To create a RAID virtual disk, select Create RAID. Then select RAID level:
RAID 0, RAID 1 or RAID 10.
2.
Choose enough available physical disks (RAID0 needs at least two physical
disks, RAID1 just needs two physical disks, and RAID10 needs four physical
disks), and press "Next".
3. Enter the name for the virtual disk, or you can use the default name.
4.
Select the Initialization method for the virtual disk.
5. Select the Stripe Size 32K or 64K for the virtual disk.
6. Press Submit. The MSU creates the virtual disk and displays the Property
tab for the new virtual disk.
7. Restart your computer to use the virtual disk.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 11/2018
-6-