Advertisement
EN /
4
To change the joystick head
Depending on the game and the player, a different type of joystick head might be
preferred and that's why the DAIJA Arcade Stick comes supplied with a second,
differently shaped head. The head can be exchanged simply by unscrewing it from
the joystick.
Note that you will need to use the supplied key or a regular flat head type
screwdriver to hold the axis in place when you are unscrewing the joystick head.
5
To change the front plate design
To give your DAIJA Arcade Stick a more personal note, you can change your front
design. At uk.nacongaming.com you can download the template file to create
your own front plate. Once printed, just change the original design sheet under-
neath the front plate. This is held by 6x hex type screws. The required screw
driver is included and can be found inside the DAIJA Arcade Stick. Before it can
be removed, you will also have to remove all the action buttons and the joystick
head (see points 2 and 4).
Joystick mode selection
Use the mode selection switch (12) to select if the joystick of the
DAIJA Arcade Stick functions in left joystick, right joystick or D-Pad
mode.
Please note that analogue joystick functions are not supported.
Advertisement
