Using The Sensors; Charging The Sensors - Delsys Trigno User Manual

Using the Sensors

Charging the Sensors

Connect the Trigno power supply to the circular DC jack lo-
cated on the side of the Trigno Base/Recharge Station. Energize
the power supply by connecting it to a Mains outlet. Be sure to
use the appropriate plug adapter for your location. Ensure that
the Trigno sensors are properly fitted in the recharge pockets.
The sensor LEDs will illuminate to amber during charging and
green when charge is complete. The recharge unit will periodi-
cally check sensors and apply a top-off charge to ensure that the
battery is kept at full capacity during extended periods of stor-
age, as long as power is connected.
Figure 2. Connecting the SC-P05 power supply to the Sensor
Charge Station.
10 Trigno Spring Contact Adapter User's Guide