Download Print this page

Pro-face PS-3650A Series Installation Manual

Hide thumbs Also See for PS-3650A Series:

Advertisement

Quick Links

PS-3650A/PS-3651A Series
(PS365XA-HD60)

Installation Guide

The PS365XA-HD60 is the hard disk unit
(HDD unit) for Pro-face's PS-3650A/PS-
3651A Series (hereafter referred as the "PS-
A") units. This 2.5 inch 60GB hard disk is
designed to be installed inside the PS-A unit.
Corresponding units:
PS-3650A/PS-3651A Series
(only for the units installing a Serial ATA
interface)
About the Manual
For the detailed information on PS-A series,
refer to the following manuals.
• PS-3650A/PS-3651A Series Hard-
ware Manual
The manual can be downloaded from Pro-
face Home Page.
URL
http://www.pro-face.com/otasuke/
Safety Cautions
• Be sure to check that the PS-A unit's
power is disconnected before installing
the unit, in order to prevent an electri-
cal shock.
• Do not attempt to modify or open the
HDD unit, since it can cause a shock or
fire.
• When installing the HDD unit, be sure
to read this guide "Installation" sec-
tion's information completely to insure
that the unit is correctly installed.
To Prevent Accidents
• Since the HDD unit is a precision instru-
ment, be sure it is neither hit by nor
pressed strongly against another object.
After unpacking, be sure the unit is not
dropped or jolted during installation. Also,
a PS-A unit built in to a larger unit (i.e.
operation panel) should be removed and
packed separately prior to shipping.
• Be sure water, liquids or metal particles are
not allowed to enter the HDD unit. Any of
these may cause either a breakdown or an
electrical shock.
• Do not place or store this unit in a location
where there is direct sunlight, excessive
heat, dust or vibration.
• Do not store or operate this unit near chem-
icals, or where there are chemical fumes.
• Do not allow anyone other than Pro-face's
own service staff to perform maintenance
or adjustments to this unit.
• Do not move or shift the PS-A unit while
the HDD unit is installed and the PS-A
unit's power is ON.
• Do not use the HDD unit in locations
where corrosive gasses are present, since
they can lead to a hard disk breakdown.
• To prevent the data damage, be sure to shut
down the PS-A unit's OS according to the
correct procedure before turning OFF the
main power.
• To prevent HDD memory leaks, restart the
OS periodically.
• The hard disk has the lifetime. To use it
longer by steady operation, read the
attached "Instructions for Using the Hard
Disk" carefully.
• In order to extend the lifetime of the hard
disk, Pro-face recommends you set the
®
Windows
[Control panel]-[Performance
and Maintenance]-[Power Management
option]-[Turn off hard disks] selection to
turn the hard disk off when the unit is not
being operated. A setting of 5 minutes is
recommended.
1

Advertisement

loading

Summary of Contents for Pro-face PS-3650A Series

  • Page 1: Installation Guide

    • Do not store or operate this unit near chem- About the Manual icals, or where there are chemical fumes. • Do not allow anyone other than Pro-face’s For the detailed information on PS-A series, own service staff to perform maintenance refer to the following manuals.
  • Page 2: Package Contents

    (2) Attachment Screws (4) (3) Installation Guide (1) (This Guide) (4) Instructions for Using the Hard Disk (1) Pro-face has taken the utmost care to ensure the quality of this product when it was shipped, however, should, for any reason,...
  • Page 3: Hardware Specifications

    (HDD access frequency of 20% or less) • To use the hard disk longer by steady operation, read the attached “Instructions for Using the Hard Disk” carefully. Environment PS-3650A Series 5°C to 50°C Surrounding Air Temperature PS-3651A Series 5°C to 45°C Storage Temperature -20°C to +60°C...
  • Page 4 • Using the HDD unit in an environment that is excessively hot and/or humid will shorten the disk’s usage lifetime. A wet bulb temperature of 29°C or less is recom- mended. This is equivalent to the following data. Temperature at 35°C at 40°C Humidity no higher than 64%RH...
  • Page 5: Installation

    When attaching the HDD unit Installation to the PS-3650A (1) Turn OFF the power switch of the PS-A and remove the power cable. Place the PS-A on a flat, level surface facing the display face downwards. • Shock Danger! Be sure to unplug the PS-A unit from its power supply prior to (2) Unscrew the expansion board cover's installing the HDD unit.
  • Page 6 (4) Remove the DISK cover. When attaching the HDD unit to the PS-3651A (1) Turn OFF the power switch of the PS-A and remove the power cable. Place the PS-A on a flat, level surface facing the display face downwards. (2) Unscrew the DISK cover's screws (3) and remove the expansion board base.
  • Page 7 Do you have any questions about difficulties with this product? Please access our site anytime that you need help with a solution. http://www.pro-face.com/otasuke/ Note Please be aware that Digital Electronics Corpora- tion shall not be held liable by the user for any damages, losses, or third party claims arising from the uses of this product.

This manual is also suitable for:

Ps-3651a seriesPs365xa-hd60