Pro-face PS365XA-HD40 Installation Manual
Pro-face PS365XA-HD40 Installation Manual

Pro-face PS365XA-HD40 Installation Manual

Advertisement

Quick Links

The PS365XA-HD40 is the hard disk unit (HDD unit) for Pro-face's PS-3650A/PS-
3710A Series (hereafter referred as the "PS-A") units. This 2.5 inch 40GB hard disk is
designed to be installed inside the PS-A unit.
Corresponding units: PS-3650A/PS-3651A Series, PS-3710A/PS-3711A Series

Essential Safety Precautions

• Be sure to check that the PS-A unit's power is disconnected before installing the unit, in
order to prevent an electrical shock.
• Do not attempt to modify or open the HDD unit, since it can cause a shock or fire.
• When installing the HDD unit, be sure to read this guide's "3. Installation" section's
information completely to ensure that the unit is correctly installed.
To prevent Accidents
• Since the HDD unit is a precision instrument, be sure it is neither hit by nor pressed
strongly against another object. After unpacking, be sure the unit is not dropped or
jolted during installation. Also, a PS-A unit built in to a larger piece of equipment (i.e.
operation panel) should be removed and packed separately prior to shipping.
• Be sure water, liquids or metal particles are not allowed to enter the HDD unit. Any of
these may cause either a breakdown or an electrical shock.
• Do not place or store this unit in a location where there is direct sunlight, excessive
heat, dust or vibration.
• Do not store or operate the HDD unit near chemicals, or where there are chemical fumes.
• Do not allow anyone other than Pro-face's own service staff to perform maintenance or
adjustments to the HDD unit.
• Do not move or shift the PS-A unit while the HDD unit is installed and the PS-A unit's
power is ON.
• Do not use the HDD unit in locations where corrosive gasses are present, since they
can lead to a hard disk breakdown.
• To prevent damage to your data, be sure to shut down the PS-A unit's OS before
turning OFF the main power.
• To prevent hard disk memory leaks, restart the OS periodically.
• A hard disk has a usage lifetime. In order to use your hard disk longer and more stable,
read through the attachment guide, "Instructions for Using the Hard Disk".
• In order to extend the lifetime of the hard disk, Pro-face recommends you set the
®
Windows
[Control panel]-[Power Management option]-[Turn off hard disks]
selection to turn the hard disk off when the unit is not being operated. A setting of 5
minutes is recommended.
Unit Disposal
• When this HDD unit is disposed of, it should be done so according to your country's
regulations for similar types of industrial wastes.

Preface

1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS365XA-HD40 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pro-face PS365XA-HD40

  • Page 1 • A hard disk has a usage lifetime. In order to use your hard disk longer and more stable, read through the attachment guide, “Instructions for Using the Hard Disk”. • In order to extend the lifetime of the hard disk, Pro-face recommends you set the ®...
  • Page 2: Package Contents

    Instructions for Using the Hard Disk (1) Installation Guide (This Guide) Pro-face has taken the utmost care to insure the quality of this product when it was shipped, however, should for any reason problems or damage have occurred during shipping, please contact your Pro-face representative immediately for service.
  • Page 3 44%RH Hard Disk Unit Settings The PS365XA-HD40 is one of the Expansion Options for PS-A Series, when shipped, set as the PS-A's Master drive (First Hard Disk).When using the PS365XA-HD40 as the PS- A's Slave drive (Second Hard Disk), be sure to attach the jumper plug in a package.
  • Page 4 Installation • Shock Danger! Be sure to unplug the PS-A unit from its power supply prior to installing the HDD unit. • Since the HDD unit is a precision instrument that has a low resistance to shocks, be sure it is neither hit by nor pressed strongly against another object when installing it.
  • Page 5 (3) Unscrew the screws (4), which are seen on the left figure, and remove the Expansion Board Base. (4) Remove the IDE cover and plug the HDD unit cable connector in the IDE’s interface (Seen the figure on the left). (5) Install the HDD unit like the left IDE I/F figure, and fix it with the screws (4)
  • Page 6 When attaching the HDD to the PS-3651A (1) Turn off the power switch of the PS-A unit, remove the power cable. Put the PS-A on the horizontal place while the display side of it is downside. (2) Unscrew the screws (3) of the IDE cover and remove the IDE cover.
  • Page 7 (3) Insert the HDD unit cable connector completely into the IDE I/F. Attach HDD unit using four (4) IDE I/F attachment screws. The torque should be 0.5 to 0.6 N•m. (4) Replace the PS-A unit’s Rear Cover and reattach five (5) attachment screws.
  • Page 8 Inquiry Do you have any questions or comments about this product? Please access our site anytime you need help with a solution. http://www.pro-face.com/otasuke/ Digital Electronics Corporation Note 8-2-52 Nanko-higashi Suminoe-ku, Osaka 559-0031 Please be aware that Digital Electronics JAPAN Corporation shall not be held liable by...

Table of Contents