Honeywell Lyric RF6GB Quick Installation Manual

This wireless glassbreak detector is intended for use with
Honeywell controls that support SiX™ series devices.
FC: This wireless glassbreak detector is intended for use
with Honeywell controls that support SiX™ series devices.
SP: This wireless glassbreak detector is intended for use
with Honeywell controls that support SiX™ series devices.
PA: This wireless glassbreak detector is intended for use
with Honeywell controls that support SiX™ series devices.
Note: Once enrolled in a system,
the RF6GB cannot be used with
another control panel until it is
removed from the current control
panel. See the Control's
instructions device removal
instructions.
FC: Note: Once enrolled in a
system, the RF6GB cannot be
used with another control panel
until it is removed from the
current control panel. See the
Control's instructions for device
removal instructions.
SP: Note: Once enrolled in a
system, the RF6GB cannot be
used with another control panel
until it is removed from the
current control panel. See the
Control's instructions for device
removal instructions.
PA: Note: Once enrolled in a
system, the RF6GB cannot be
used with another control panel
until it is removed from the
current control panel. See the
Control's instructions for device
removal instructions.
LEDS / LEDS / LEDS /
LEDS
PLEASE GO TO THE BOTTOM OF THE NEXT PAGE FOR
BETA QUICK INSTALL GUIDE – 01/12/15
FCC/IC AGENCY STATEMENTS
RF6GB
Enroll / Enroll / Enroll / Enroll
Mounting Locations /
Mounting Locations / Mounting Locations
Mounting Options /
Mounting Options / Mounting Options
G1 Red G2 Status
Test Mode
Event detected during Test Mode
Alarm detected during Test Mode
Low Battery detected during Test Mode
2 2
Power Up / Tamper switch pressed / FG-701
Activated before enrollment
Tamper Detected
1
Test Mode is 10 minutes. / Test Mode is 10 minutes / Test Mode is 10 minutes / Test Mode is 10 minutes
2
The LEDs are not visible during Normal Mode / The LEDs are not visible during Normal Mode / The LEDs are not
visible during Normal Mode / The LEDs are not visible during Normal Mode
Mounting Locations /
Mounting Options /
1