Managing Contact Groups - Nokia 6600 User Manual

r1013_en.book Page 32 Tuesday, September 2, 2003 8:07 AM
P e r s o n a l i n f o r m a t i o n
2. Scroll to a number and press Assign. When you return to the contact
information view, you can see the speed dial icon next to the
number.
• To call the contact by speed dialling, go to standby mode and press
the speed dialling key and .
Adding a ringing tone for a contact card or group
You can set a ringing tone for each contact card and group. When that
contact or group member calls you, the phone plays the chosen ringing
tone (if the caller's telephone number is sent with the call and your
phone recognises it).
1. Press to open a contact card or go to the Groups list and select a
contact group.
2. Select Options→ Ringing
3. Use the joystick to select the ringing tone you wish to use for the
contact or group and press Select.
• To remove the ringing tone, select
ringing tones.
Note: For an individual contact, the phone will always use the ringing
tone that was assigned last. So, if you first change a group ringing tone and then
the ringing tone of a single contact that belongs to that group, the ringing tone
of the single contact will be used when the contact calls you the next time.

Managing contact groups

You can create contact groups, which can, for example, be used as
distribution lists for sending text messages and e-mail. A ringing tone
may be added to a group. See 'Adding a ringing tone for a contact card
or group', p. 32.
Options in the Groups list view: Open,
Ringing tone, Contacts info, Settings, Help, and Exit.
32
tone. A list of ringing tones opens.
Default tone from the list of
New group, Delete, Rename,