Nokia 6600 User Manual page 31

r1013_en.book Page 31 Tuesday, September 2, 2003 8:07 AM
6. When the voice tag has been successfully saved, the note
saved is displayed and a beep sounds. A symbol
to the number in the contact card.
Making a call using a voice tag
1. In standby mode, press and hold
note Speak now is displayed.
2. When you are making a call by saying a voice tag, hold the phone at
a short distance away from your mouth and face and say the voice
tag clearly.
3. The phone plays the original voice tag, displays the name and
number, and after a few seconds dials the number of the recognised
voice tag.
• If the phone plays the wrong voice tag, or to retry voice dialling,
press Retry.
Note: When an application using a data call or GPRS connection is
sending or receiving data, you cannot make a call by using voice dialling. To make
a call by using a voice tag, end all active data connections.
Replaying, erasing, or changing a voice tag
To replay, erase, or change a voice tag, scroll to the item that has a voice
tag (indicated by ), select Options→
• Playback - to listen to the voice tag again, or
• Delete - to erase the voice tag, or
• Change - to record a new voice tag. Press
Assigning speed dialling keys
Speed dialling is a quick way to call
frequently used numbers. You can assign
speed dialling keys to eight phone numbers.
Number 1 is reserved for the voice mailbox.
1. Open the contact card for which you
want a speed dialling key and select
Options→ Assign speed
dialling grid opens, showing you the
numbers from 1-9.
P e r s o n a l i n f o r m a t i o n
can be seen next
. A short tone is played and the
Voice tag, and then either:
Start to record.
dial. The speed
Voice tag
31