Advertisement
Applies to: Propane PDG8000, Propane Bull1250, Tri-Force, Burnisher, Hurricane, Lightning, and Twister
Start and Operation
o
Gas on/ off
o
Power on/ off
o
Choke on/off, if applicable
o
Throttle on/ off
o
Emergency stop
o
Check oil level and air filter before starting
o
Keep nuts and bolts tightened and hose connections snug as applicable
o
Proper tilting of machine, if applicable
Maintenance
o
Air filter cleaning/ replacement
o
Oil filling/ changing
o
Owner's manual
Safety of Propane Cylinders
o
Owner's manual
o
Do not smoke or use any device with an open flame when handling, filling or transporting propane cylinders.
o
20-lb. propane outdoor grill cylinders are not legal for use on propane floor care equipment.
o
Vapor powered machines do not have an evaporating system and will freeze up if liquid propane is introduced.
o
Always wear gloves when filling a propane cylinder. Propane boils at -44 degrees F (-42 degrees C).
o
Store cylinders outside in an upright position in a secure, tamper-proof, steel mesh storage cabinet.
o
There must be at least 5 ft (1.5 m) of space between the cabinet and the nearest building opening, like a door or
window.
o
Do not store cylinders inside a building or vehicle.
o
Avoid dropping or banding cylinders against sharp objects.
o
Any cylinder that has ever been filled is always considered full. The only time that a cylinder is considered empty
is when it is new, before it is filled with propane.
o
When transporting a propane powered machine, the propane cylinder may be strapped onto the machine as
long as the machine itself is firmly secured in the vehicle.
o
When transporting, the cylinders, if not strapped onto the machine, should be securely fastened and standing in
an upright position with the service valve closed.
Propane Safety Checklist
Advertisement
